PG DIPLOMA IN OIL AND GAS

img

PG DIPLOMA IN OIL AND GAS COURSE OVERVIEW

Looking for a PG Diploma course in Oil and Gas that provides comprehensive industry knowledge and practical skills? Our course covers all the essential aspects for success in this highly competitive sector. With limited company training budgets, it can be challenging to acquire the necessary knowledge to advance your career. That’s why we’ve designed our program based on years of industry experience, providing you with the mentorship and industry exposure needed to excel. Our course covers everything from the basics to advanced topics like piping, quality control (including welding), and non-destructive testing methods currently used in the oil and gas industry. Gain practical training that will take you from beginner to professional level, and become a sought-after candidate in this exciting field.

COURSE TOPICS
  • Piping engineering
  • QA/QC in welding
  • NDT LEVEL 2
SYLLABUS
  • Duties and responsibility of a inspector
  • Terms and definitions , symbols
  • Destructive testing and NDT of welds
  • WPS / PQR / WPQR
  • Welding Techniques
  • Welding consumables
  • Weldability of steel
  • Welding defects and its remedy
  • Heat Treatment , preheat , PWHT
  • Codes and Standards
  1. Basics of piping – introduction, pipes, fittings, flanges, valves, piping symbols
  2. Block is flow diagram
  3. Process flow diagram
  4. Piping and instrumentation diagram
  5. Equipment layout
  6. Pipe arrangement drawings, sections & elevation
  7. Pipe Routing
  8. Pipe supports
  9. Piping Isometrics
  10. Pipeline design
  11. Pipeline construction
  12. Codes and standards
  13. Isometric charts
  • Visual testing
  • Liquid penetrant testing
  • Magnetic particle testing
  • Radiographic testing
  • Ultrasonic testing
  • Radiographic film interpretation
CERTIFICATIONS
QUALIFICATION REQUIRED

Students with the following qualifications can apply for Diploma in Oil and Gas Course from Ambit Automation.

  • BTech
  • Diploma
  • Degree
COURSE DURATION

The duration of the course is normally four months with 100% placement assistance. We carry out periodic training, intensive courses, short-term training and 4 months of training.

COURSE BENEFITS

These are the benefits that a student can get from our oil and gas course.

  • Know the technical and managerial skills required to operate an oil and gas field.
  • Understand the basics of industrial safety.
  • Implementation of knowledge in the right dimension.
  • Get a good position on the job market.
  • To work for a dream company.
  • Attain a higher job role.
  • Improve work performance.
  • Increase earnings.

 

Oil and gas training institute Kochi
The best oil and gas training institute Kerala
Enquiry Now
Syllabus
Feedback from students
Gireesh Vl
Gireesh Vl
2023-02-24
I completed my training in oil and gas piping. I trained in NDT,QC and Piping. I got practical exposure in above topics. Safe and healty practice make me a knowledgeable person. Knowledge in Welder qualification test, WPS, etc I got from the training. I also learn ISOMETRIC DRAWING,GAD,P&ID very well. Trainers are experienced and knowledgeable person. Thank you Ambit Automation for the training
Abhishek abhi
Abhishek abhi
2023-02-24
Excellent training in Qaqc welding,Ndt,piping,drilling. I got experienced training from Ambit automation. Practical oriented training program gives me a good knowledge about the site. I recommend this institute for ndt,piping,Qaqc, drilling training
Suhair Khalid
Suhair Khalid
2023-02-24
I heard this Institute name from one of my friends. He was trained in oil and gas piping course from here. I joined 6 month before. Now I completed my course. I gain a lot of knowledge in NDT Method in UT, MPT, VT, LPT, RT, RTFI. I also got training in welder qualification test, WPS ets. I really enjoy my training. Our trainers were friendly and experienced. Thank you Ambit Automation.
Aswin Prakash
Aswin Prakash
2023-02-24
Thank you Ambit Automation for the training and support. I trained in NDT, QAQC- WELDING,PIPING AND DRILLING from the institute. I gain a lot of knowledge and practical knowledge. Trainers are friendly and well experienced.
Binu Rameshan
Binu Rameshan
2023-02-24
Excellent institution for oil and gas training. Drilling, piping,qaqc and ndt training gives me a hope to the future. Thank you Ambit Automation for the training and support. Thank you my Trainers....
Siva mrinal
Siva mrinal
2023-02-24
Last one year I don't have any job at that time I heard about this institute now I am completed my course today, now I have hope for future.
Jalaja T
Jalaja T
2023-02-24
Happy to attend the training.
Sree Kuttan
Sree Kuttan
2023-02-24
This institution give me good training and practical exposure in NDT,QC-WELDING,and in Piping. Training staffs are excellent. This certificate programmes are good for career development. Thank you Ambit Automation Sreekutan K
Athish Nair
Athish Nair
2023-02-24
It's an good institution for QA QC,NDT ND piping engineering and excellent staff for teaching their teaching way is very gud nd esy to understand ND good lab facility qc nd ndt piping staff has experience in field
FAQ - Frequently Asked Questions

QAQC in welding, non-destructive testing, piping fabrication and inspection, drilling are the important subjects of oil and gas course.

Piping supervisor, production engineer, fabricator, QC engineer.

BE/BTECH in petrochemical engineering, BE/BTECH in Mechanical engineering, Diploma in petro-chemical engineering, Diploma in mechanical engineering are the minimum qualification needed for PG Oil and gas course.

Diploma in QAQC and piping engineering    – (4 months)

Diploma in on shore and offshore drilling + Diploma in QAQC and piping engineering     – (6 months)

BSS

TUV SUD

ASNT LEVEL 2 

Call Now Button