Diploma in Oil and Gas Course



The course covers all important topics which make the student a real professional in oil and gas industry.  This is a highly competitive industry. Getting the right mentor and the right exposure within the industry is difficult during the growth phase of your career. A diploma course in oil and gas provides students a detailed exposure to the industry. Diploma in oil and gas course is designed based on years of field experience by our experienced trainers. The course include piping, quality control (in welding), non-destructive testing method, Industry safety standards, upstream overview, etc that use in oil and gas industry nowadays. Diploma in oil and gas course is extremally practical oriented which gives a real industry exposure to each student.

  1. Duties and responsibility of a inspector
  2. Terms and definitions , symbols
  3. Destructive testing and NDT of welds
  4. WPS / PQR / WPQR
  5. Welding Techniques
  6. Welding consumables
  7. Weldability of steel
  8. Welding defects and its remedy
  9. Heat Treatment , preheat , PWHT
  10. Codes and Standards
  1. Basics of piping – introduction, pipes, fittings, flanges, valves, piping symbols
  2. Block is flow diagram
  3. Process flow diagram
  4. Piping and instrumentation diagram
  5. Equipment layout
  6. Pipe arrangement drawings, sections & elevation
  7. Pipe Routing
  8. Pipe supports
  9. Piping Isometrics
  10. Pipeline design
  11. Pipeline construction
  12. Codes and standards
  13. Isometric charts
  • Visual testing
  • Liquid penetrant testing
  • Magnetic particle testing
  • Radiographic testing
  • Ultrasonic testing
  • Radiographic film interpretation

Industrial safety refers to the management of all operations and events within an industry in order to protect its employees and assets by minimizing hazards, risks, accidents, and near misses.


Students having the following qualification can do diploma in oil and gas course.

  • BTech
  • Diploma
  • Degree
  • Plus Two
  • ITI

The course duration is 6 months .With 100% placement assistance. We conduct regular training, crash course, short-term training & 6 months of training. Check out the syllabus provided by AMBIT AUTOMATION before getting admission.


After completing our Diploma in oil and gas course students will get the following certifications.


These are the benefits for students from our oil and gas diploma course. 

  • Knowing the technicality and management skills required to run the oil and gas fields.
  • Understand the fundamentals of industrial safety.
  • Executing the knowledge in the correct dimension.
  • Accruing a good position in job market.
  • To work for a dream company.
  • Attain a higher job role.
  • Improve work performance.
  • Increase earnings.

Our course contains QA QC ,NDT, Piping Inspection which mainly intended to get knowledge and skill in the oil and gas field. It provides not only through theoretical section but through training and practice. International certifications help candidates to assure their position in large oil and gas industries in the world.

QA/QC/Inspection professionals in the oil and gas industry are responsible for a number of duties and work in every aspect of the industry. These individuals will make sure that equipment and parts are operating perfectly to meet the regulatory standards. Oil and gas engineers work in several areas of petroleum exploration and extraction. Typically, an oil and gas engineer specializes in one area but needs to be mindful of the entire process since the engineering and production components work together.

Quality Assurance (QA) is a set of activities for ensuring quality in the processes by which products are developed. Quality Control (QC) is a set of activities for ensuring quality in products. The duties of a QA/QC Engineer are preparation of the project-specific quality plan inspection, material reception, ongoing work inspection like a visual check of welding and installation of equipment, motors, piping supports & fittings, hydro test pneumatic test till commissioning and also documentation of all of this.

Piping Components
Safety Equipment
vijith kumar
vijith kumar
This is one of the best institution where Civil And Mechanical students can learn all their Softwares like QTO, Primavera, Revit 3DsMax Vray etc with very Nominal Cost, Trainers are really qualified and Well equiped to handle students. They provide 100% placement too. Thanks Ambit Automation.
Rijun Rs
Rijun Rs
A versatile institute for career oriented grooming and guidance. I have completed Oil and Gas QAQC from this institute which was indeed a ravishing experience. The faculties Deepak Sir and Felix sir are very friendly & approachable and have been a constant support throughout. My heartfelt gratitude to Ambit institute.
Arjun Ranadev
Arjun Ranadev
Classes are very good, knowledgeable and easy to understand. Teaching staffs are so friendly. Teaching styles of Felix Sir and Deepak Sir are so good and understandable.
eldhose k p
eldhose k p
Best training for CNC programming and Master cam in kerala. After this course i got placed in Poland from Ambit Automation. Thanks Ambit 👌🏻
Adithye M Das
Adithye M Das
One of the best Automation Service Centre in Kochi.

Call Now Button