MEP COURSE

img

COURSE OVERVIEW

MEP Course By Ambit Automation Mechanical Electrical Plumbing deals with the construction techniques we use for both residential, commercial, and industrial purposes. From a mechanical point of view, we observe the HVAC section, which is mainly based on comfort conditions.

HVAC SECTION IN MEP COURSE

IN Heating Ventilation and Air Conditioning we will discuss the calculation of the heat load in different types of air conditioning. This includes air conditioning which we use for both residential and commercial purposes. The selection of the same channels is an important concept in the HVAC industry. So we also need to dive into the air routing section. In the channel section, we will examine various types of channels, their size, and also the drawings related to the pipeline.

Another important concept is the central climate system. The types of central air conditioning are widely used in commercial buildings and in industry. For each building that designs the main concept, we consider cost and energy efficiency. Therefore, the right choice is very important due to the high cost and the great concept of energy efficiency. The choice of CHILLER, AHU, FCU, and their types is also important in the design of HVAC. We also studied bombs and their classifications.

COURSE TOPICS

Some of the important topics we cover under the plumbing system portion of our MEP course. This gives students great clarity about the plumbing system.

  • PLUMBING FUNDAMENTALS
  • QUALITY OF WATER
  • MOUNTING OF PLUMBING FIXTURES
  • PLUMBING DRAWINGS
  • INTERNAL PLUMBING
  • PHE CALCULATION
  • COLDWATER
  • HOT WATER
  • PUMP SELECTION
  • TANK SIZING
  • HOT & COLD WATER PIPES
  •  EXTERNAL PLUMBING
  • RAINWATER HARVESTING & STORMWATER

Practical sessions of Plumbing portions include the following topics.

  • SCHEME
  • SCHEDULE
  • BILL OF QUANTITY
  • TENDER
  • BASIC PROJECT -1
  • BASIC PROJECT -2
  • PROJECT – JEWELLERY SHOP
  • PROJECT- HOTEL
  • FINAL PROJECT- FLAT

Theoretical Portion of electrical portion in MEP Training Includes following Topics

  • BASIC ELECTRICAL ENGINEERING
  • ELECTRICAL CODES & STANDARDS
  • SYMBOLS & DRAWINGS
  • LIGHT & POWER SUBCIRCUITS
  • CIRCUIT PROTECTION
  • TYPES OF MCBSs
  • SUPPLY CONNECTIONS
  • TYPES OF DISTRIBUTION BOARD
  • LOAD CALCULATION
  •  LOAD BALANCING
  • SELECTION OF WIRES & CABLES
  • MOUNTING LEVEL OF ACCESSORIES
  • WIRE LENGTH CALCULATION
  • ESTIMATION & COST
  • ELECTRICAL LAYOUTS
  • SINGLE LINE DIAGRAM OF RESIDENTIAL/SMALL BUILDINGS
  • SELECTION OF EQUIPMENT
  • CABLES, TYPES & SELECTION
  • SINGLE LINE DIAGRAM
  • LIGHTING DESIGN

The practical session of the electrical portion includes the following topics in MEP Training.

  • SCHEME
  • SCHEDULE
  • BILL OF QUANTITY
  • TENDER
  • BASIC PROJECT -1
  • BASIC PROJECT -2
  • PROJECT – JEWELLERY SHOP
  • PROJECT- HOTEL
  • FINAL PROJECT- FLAT
  • FIRE FIGHTING FUNDAMENTALS
  • FIRE PROTECTION SYSTEM
  • SPRINKLERS
  • HYDRANT SYSTEM
  • PUMPING SYSTEM
  • FIRE FIGHTING
  • FIRE DETECTION SYSTEMS
  • FM 200 SYSTEM DESIGNING
  • EXECUTION
  • SCHEDULE
  • BILL OF QUANTITY
  • TENDER
  • BASIC PROJECT -1
  • BASIC PROJECT -2
  • PROJECT – JEWELLERY SHOP
  • PROJECT- HOTEL
  • FINAL PROJECT- FLAT
  • GRAPHICAL USER INTERFACE
  • INTRODUCTION TO ENGINEERING DRAWINGS
  • ORTHOGRAPHIC VIEWS
  • ISOMETRIC VIEWS
  • COORDINATE VIEWS
  • FIRST ANGLE PROJECTION
  • THIRD ANGLE PROJECTION
  • FILE MANAGEMENT
  • LIMITS
  • UNITS
  • DRAFTING SETTINGS
  • DRAWING TOOLS
  • MODIFY TOOLS
  • OBJECT PROPERTIES
  • PROPERTIES PALLET
  • LINE TYPE SCALE 4
  • LAYER MANAGEMENT
  • ADDING/REMOVING LAYERS
  • LAYER PROPERTIES
  • LAYER STATUS
  • SYMBOL AND BOM CREATION
  • BLOCK
  • ATTRIBUTE
  • TOOLS PALLET
  • BLOCK EDIT
  • ATTRIBUTE EDIT
  • BLOCK ATTRIBUTE MANAGER
  • ANNOTATIONS
  • INTRODUCTION TO PLOTTING
  • LAYOUT
  • TITLE BLOCK
  • TEMPLATES
  • VIEWPORTS
  • PLOT STYLE

 

COURSE SYLLABUS
  • Introduction
  • HVAC fundamentals
  • Psychometry
  • Ac cycle
  • HVAC system
  • Heat load estimation
  • Equipment selection
  • Air side system design
  • Duct design (software )
  • Air handling equipment & layout
  • Fan selection
  • VRF/VRV system
  • Schedule & estimate preparation
  • Chiller & plant configuration
  • Type of chillers
  • Pump selection
  • system – valves & accessories
  • Scheme
  • Pump head calculation
  • Schedule & estimate
  • Kitchen hood ventilation
  • Toilet ventilation
  • Car parking
  • Schedule & estimate
  • Tender
  • Basic Electrical Engineering
  • Electrical Codes & standards
  • Symbols and Drawings
  • Light & Power subcircuits
  • Circuit Protection
  • Types of MCBs
  • Supply connections
  • Types of Distribution board
  • Load Calculation
  • Load Balancing
  • Selection of wires&cables
  • Mounting level of accessories
  • Wire Length calculation
  • Estimation & Cost
  • Electrical layouts
  • Single Line diagram of a residential/small buildings
  • Selection of equipments
  • Cables,Types & selection
  • Single Line diagram of an industrial or commercial building
  • Lighting Design
  • Introduction
  • Plumbing fundamentals
  • Quality of water
  • Mounting of plumbing fixtures
  • Plumbing drawing
  • Internal plumbing
  • PHE calculation
  • Cold water
  • Hot water
  • Pump selection
  • Tank sizing
  • Hot & cold water pipes
  • External plumbing
  • Rain water harvesting & storm water
  • Schedule & estimate preparation
  • Introduction
  • Firefighting fundamentals
  • Fire protection system
  • Sprinklers
  • Hydrant system
  • Pumping system
  • Firefighting
  • Fire detection system
  • System design
  • Schedule preparation & estimation
  • Schedule & estimate
JOB ROLES AND RESPOSIBILITIES AFTER MEP TRAINING
  • Prepare plan details
  • Prepare detail and specified cost estimated of plumping heating ventilating air conditioning.
  • Review plans and specifications
  • Provide technical advise to staff designer surpervisor
  • Analyse problems and formulate solutions
  • Plan and review works of contractors and consultants
  • Manage day to day work of MEP team 
COURSE CERTIFICATION
  • TUV SUD International Certificate
  • BSS (Govt of India Approved ) Certificate.
EDUCATIONAL QUALIFICATION
  • BTech
  • Diploma
  • ITI
COURSE DURATION – 4 MONTHS

The best training institute for MEP at Cochin Ambit Automation offers hands-on experience with 100% placement support. We conduct regular training, intensive courses, short-term training, and 4 months of training.

 

Gireesh Vl
Gireesh Vl
2023-02-24
I completed my training in oil and gas piping. I trained in NDT,QC and Piping. I got practical exposure in above topics. Safe and healty practice make me a knowledgeable person. Knowledge in Welder qualification test, WPS, etc I got from the training. I also learn ISOMETRIC DRAWING,GAD,P&ID very well. Trainers are experienced and knowledgeable person. Thank you Ambit Automation for the training
Abhishek abhi
Abhishek abhi
2023-02-24
Excellent training in Qaqc welding,Ndt,piping,drilling. I got experienced training from Ambit automation. Practical oriented training program gives me a good knowledge about the site. I recommend this institute for ndt,piping,Qaqc, drilling training
Suhair Khalid
Suhair Khalid
2023-02-24
I heard this Institute name from one of my friends. He was trained in oil and gas piping course from here. I joined 6 month before. Now I completed my course. I gain a lot of knowledge in NDT Method in UT, MPT, VT, LPT, RT, RTFI. I also got training in welder qualification test, WPS ets. I really enjoy my training. Our trainers were friendly and experienced. Thank you Ambit Automation.
Aswin Prakash
Aswin Prakash
2023-02-24
Thank you Ambit Automation for the training and support. I trained in NDT, QAQC- WELDING,PIPING AND DRILLING from the institute. I gain a lot of knowledge and practical knowledge. Trainers are friendly and well experienced.
Binu Rameshan
Binu Rameshan
2023-02-24
Excellent institution for oil and gas training. Drilling, piping,qaqc and ndt training gives me a hope to the future. Thank you Ambit Automation for the training and support. Thank you my Trainers....
Siva mrinal
Siva mrinal
2023-02-24
Last one year I don't have any job at that time I heard about this institute now I am completed my course today, now I have hope for future.
Jalaja T
Jalaja T
2023-02-24
Happy to attend the training.
Sree Kuttan
Sree Kuttan
2023-02-24
This institution give me good training and practical exposure in NDT,QC-WELDING,and in Piping. Training staffs are excellent. This certificate programmes are good for career development. Thank you Ambit Automation Sreekutan K
Athish Nair
Athish Nair
2023-02-24
It's an good institution for QA QC,NDT ND piping engineering and excellent staff for teaching their teaching way is very gud nd esy to understand ND good lab facility qc nd ndt piping staff has experience in field

Call Now Button