Course Topics
ELECTRONIC SECURITY
HVAC
PLUMBING
INDUSTRIAL & DOMESTIC ELECTRICAL WIRING
AutoCAD
Basic knowledge of electrical wiring
Introduction to active and passive components
Power supply design and construction
Relay logic and digital electronics
Signal Conditioning Circuits
Introduction to Electronic Security
Scope of Electronic Security
Types of CCTV Systems
Camera Selection and Design Concepts
What are the camera Types
Camera Specifications & Features
Introduction to Digital Video Recorder
Setting Up a DVR
DVR Structure and Sections
Classification Of DVR
Special DVRs
Networking
Local Access Configuration
Remote Access Configuration
Crimping Practice
Need for Fire Alarm System
Types of Fire Detectors
Types of Fire Panels
Conventional and Addressable System
Input-Output Modules
Indicators & Annunciators
Fire Cables and Classes of Wiring
Learn Fire Alarm Wiring and Configuration
How to do Fire Panel Interfacing with Access Control System
Introduction to Intruder Alarm System
Need for Intruder Alarm System
Intrusion Detector Types
Hardware and Software Types of Zone
Zone Attributes
Keypad Types
Panel Types
Zone Partitioning
Panel Programming Using Keypad
Panel Programming Using Software
Access Control System Topology
Credentials
Card Types
Biometric System
Reader Types
Locking Devices, Exit Switch & Status Detectors
Panel Communication Protocols
Panel Programming
VDP Panel Connection
System Configuration
Introduction to Electrical Systems
Residential Electrical Wiring
Serial parallel connection
Circuit Basics
Home Electrical System
The Service Panel
Grounding
About Cables and Wires
Residential Electrical Wiring
Wiring a Subpanel
How to wire a 30-Amp 120/240V Receptacle.
Wire a Switch-Controlled Light Fixture
Wiring a Switch-Controlled Receptacle
Two Receptacles in Sequence
How to wire a Switch-Controlled Split Receptacle
Wiring Three-Way Switches and Light Fixture
Wiring a Doorbell.
Symbols and Drawings
Circuit Protection
Types of MCBs
logical wiring
Types of Distribution board
Load Calculation
Electrical motor
Motor terminal plate connection
Motor starter connection
Invertor and Generator arrangement
Load Balancing
Selection of wires & cables
Estimation & Cost
Electrical layouts
Single Line diagram of a residential/small buildings
HVAC System
Type of AC
Heat Load Estimate
Ventilation Systems
Chiller and VRF system
Duct design
BOQ and Estimation
Introduction to plumbing system
Plumbing system
plumbing fittings
Support for Pipes
Pipe sizing and calculation
Valves and Accessories
Installation of Cold and Hot Water Line and Drainage System
mounting of plumbing fixtures
Tank sizing and calculations
BOQ and Estimation
Introduction to AutoCAD
Drawing Tools, modifying tools and Isometric
Object Properties, Layers, Symbols, Block Creation and Annotation
Drawing Practice
Sheet Setting and Layout
Building Maintenance Technician Course Qualification
- Diploma
- Degree
- ITI
- Plustwo
Building Maintenance Technician Course Certifications
Govt of India approved -BSS Certification
Building Maintenance Technician Course Duration
6 Months
Ambit Automation Building Maintenance Course – Location Guide
Welcome to Ambit Automation, your Best Building Maintenance Technician Course in Kochi. Our address is:
66/2778, First Floor Raja Arcade, Chittoor Road, Pullepady, Kochi, Ernakulam, Kerala 682035
Conveniently Located Near MG Road, Cochin
Our institute is strategically located near MG Road, one of the major arteries in Cochin, and is very close to Padma Theater. To find us:
- Landmark: Opposite Padma Theater, MG Road.
- Nearby Road: Chittoor Road.
- Nearby Shop: Above Kavitha Cycle Shop.
Directions for Easy Access
By Train:
- Ernakulam Town Station: Exit the station, search for “Ambit Automation Institute” on Google Maps, or take a bus via Chittoor Road or Ernakulam MG Road towards Padma Theater. We are just a 15-minute walk from the station.
- Ernakulam Junction Station: Follow the same directions as above. We are a short 15-minute distance from the station.
By Bus:
- Ernakulam KSRTC Bus Station: Get down at the bus station and take an auto-rickshaw or Uber towards Chittoor Road, right from Rajaji Junction towards Pulleppady Junction. It’s just a 5-minute ride from the KSRTC bus stand.
Serving Students Across Kerala
We are proud to have students for our Building Maintenance Technician Course from various districts including:
- Wayanad
- Kasaragod
- Kannur
- Calicut
- Malappuram
- Thrissur
- Trivandrum
- Kollam
- Alleppey
- Kottayam
- Idukki
Finding Us is Easy
Simply open Google Maps and search for “Building Maintenance Course near me” or “Ambit Automation,” and the map will guide you to our location.
We look forward to welcoming you to Ambit Automation, where you can elevate your Building Maintenance skills in the heart of Kochi.
How to Contact for Building Maintenance Technician Course Admission:
+91 484 486 3886, 799 425 5999,
+91 799 437 7666, 799 431 1999,
+91 799 432 2666, 799 421 1184,
FAQs
What qualifications do I need to enroll in the Building Maintenance Technician course?
To enroll in the Building Maintenance Technician course, you typically need a Diploma, Degree, ITI (Industrial Training Institute) certification, or Plus Two (12th-grade equivalent). These qualifications demonstrate your foundational knowledge in relevant areas and prepare you for the technical aspects of building maintenance.
What certifications will I receive upon completing the Building Maintenance Technician course?
Upon successful completion of the Building Maintenance Technician course, you will receive a prestigious Government of India approved BSS Certification. This certification is highly regarded in the industry and validates your skills and expertise in building maintenance practices, including electronic security, HVAC systems, plumbing, electrical wiring, and AutoCAD usage.
What are the key topics covered in the Building Maintenance Technician course?
The Building Maintenance Technician course covers a wide range of essential topics to equip you with comprehensive skills. These include Electronic Security, where you’ll learn about CCTV systems, digital video recorders (DVRs), fire alarm systems, intruder alarm systems, access control systems, and networking basics. Additionally, the course delves into HVAC systems, plumbing techniques, industrial and domestic electrical wiring, and essential AutoCAD skills for technical drawings and annotations in building maintenance projects.
What is the duration of the Building Maintenance Technician course?
The Building Maintenance Technician course typically spans a duration of 6 months. During this time, you will undergo intensive training and practical sessions to master the intricacies of building maintenance across various systems and components.
What career opportunities are available after completing the Building Maintenance Technician course?
Upon completing the Building Maintenance Technician course, you unlock a range of rewarding career opportunities. You can pursue roles such as Building Maintenance Technician, Facilities Technician, Maintenance Engineer, HVAC Technician, or Electrical Technician in diverse settings, including residential complexes, commercial buildings, industrial facilities, and more. Your expertise in electronic security, HVAC systems, plumbing, and electrical wiring will make you a valuable asset in the maintenance and operation of buildings and infrastructure.